FAQ Questions
Legal tint limit for cars in the state of MD is 35%.
Microfiber towels and nonamonia based window cleaner are ideal for cleaning your windows without harming tint film. Tint film can be removed if desired.
Yes, Window Film can be removed at any time after the installation. As a tint professional we know all the tips and tricks on proper tint removal. Please call us if you require a removal. It is a very tough and messy job, not recommended for beginners.
Tint film is installed on the interior of the windows.
Global window film is the tint film that we use and does inlude lifetime warranty against any peeling, bobbles or fading. 3M tint film is also availible upon request.
Tint does not affect rear defrost.
FAQ Questions
Tint installation time ranges from 45 min. to 2 hrs depending on the vehicle.
Tint film upon installation requires time for installation solution to dry. Prior to solution drying a few little bubbles or patchiness may appear, aftre solution dries there will be no bubbles or patchiness. Rear windows with a lot of bubbles is caused by turning on the rear defrost before the tint solution has dried. After tint is installed the rear defrost should not be turned on for at least three days.
Tint is very durable under normal vehicle operating conditions.
Tint film upon installation requires time for installation solution to dry. Prior to solution drying a few little bubbles or patchiness may appear, aftre solution dries there will be no bubbles or patchiness..
Rear windows with a lot of bubbles is caused by turning on the rear defrost before the tint solution has dried. After tint is installed the rear defrost should not be turned on for at least three days.
Purple tint is a result of using cheap tint film as over time the sun will cause cheap film to discolor.
Lifetime warranty includes no peeling, bubbles, fading or discolored tint film.
Factory tint is when the tint is made into the glass at the factory where the vehicle is being manufactored. In other words, “factory tint” means the dye is actually in the glass, it can never be removed. “Aftermarket tint” is a transparent paper with an adhesive side that bonds to the glass, it can be removed.